Tuotanto- ja materiaalitekniikkaLaajuus (5 op)
Tunnus: TLTT5500
Laajuus
5 op
Opetuskieli
- suomi
- englanti
Vastuuhenkilö
- Pasi Poutiainen
Osaamistavoitteet
Tässä opintojaksossa tuotannolla tarkoitetaan osien valmistamista loppuasiakkaan tarpeisiin. Opintojaksolla tutustutaan sekä perinteisiin että moderneihin valmistusmenetelmiin ja niihin liittyviin materiaaleihin, sillä materiaalilla on iso merkitys tuotteen hinnan muodostumiseen, valmistettavuuteen ja käytettävyyteen. Toimiessasi logistiikkainsinöörinä sinulla tulee olla hyvä ymmärrys valmistusmenetelmien ja materiaalien vaikutuksesta kustannuksiin.
Tällä opintojaksolla opit
- etsimään tietoa materiaaleista ja niiden ominaisuuksista
- tuntemaan eri materiaaleja ja niihin liittyviä valmistusteknologioita
- tuntemaan eri layout tyyppejä ja tuotantostrategioita
- ymmärtämään materiaalien ominaisuuksia ja niiden vaikutuksia valintoihin
- soveltamaan materiaalien valintaa ja valmistusteknologioita
Käytyäsi opintojakson ymmärrät laajasti opintojaksolla käsiteltyjen asioiden terminologian. Saat laaja-alaisen näkemyksen eri materiaaleista, valmistusteknologioista ja niiden mahdollisuuksista. Ymmärrät, miten eri materiaaleja ja valmistusteknologioita voidaan hyödyntää todellisiin käyttökohteisiin. Saat osaamiset ja valmiudet etsiä tietoa eri materiaaleista ja valmistusteknologioista.
Opintojaksolla edistettävät ja arvioitavat osaamiset: teknologiaosaaminen, tekniikan soveltaminen käytäntöön, viestintä ja tiimityö.
Opintojakson osaamistavoite:
Ymmärrät valmistusteknologioiden terminologian, eri materiaalien mahdollisuudet ja niiden merkityksen. Hallitset opintojaksolla käsiteltyjen asioiden keskeiset käsitteet ja teoriat sekä osaat soveltaa aiempaa osaamistasi valmistusteknologioiden että materiaalien valintaan.
Sisältö
Opintojaksolla käsitellään seuraavia pääteemoja:
- Lay-out tyypit ja tuotantojärjestelmät
- Valmistustusteknologiat (materiaalit, menetelmät)
- Eri materiaalit - rakenne ja ominaisuudet
- Materiaalien valinta ja hankintakanavat
- Materiaalien ja valmistusteknologioiden soveltaminen
Esitietovaatimukset
Materiaalien ohjaus
Arviointikriteerit, tyydyttävä (1)
1: Opiskelija saavuttaa kaikki opintojakson osaamistavoitteissa kuvatut asiat.
2: Opiskelija saavuttaa kaikki opintojakson osaamistavoitteissa kuvatut asiat ja pystyy hyödyntämään näitä tietoja.
Arviointikriteerit, hyvä (3)
3: Opiskelija ymmärtää kaikki opintojakson osaamistavoitteissa kuvatut asiat ja osaa hyödyntää oppimiaan taitoja.
4: Opiskelija hallitsee lähes kaikki opintojakson osaamistavoitteissa kuvatut asiat ja osaa soveltaa oppimiaan taitoja.
Arviointikriteerit, kiitettävä (5)
5: Opiskelija hallitsee kaikki opintojakson osaamistavoitteissa kuvatut asiat ja osaa soveltaa oppimiaan taitoja.
Enrollment
01.08.2023 - 24.08.2023
Timing
28.08.2023 - 15.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Purchasing and Logistics Engineering
Teachers
- Pasi Poutiainen
Groups
-
TLP22S1Bachelor's Degree Programme in Purchasing and Logistics Engineering
-
TLP23VSBachelor's Degree Programme in Purchasing and Logistics Engineering (AMK) vaihto-opiskelu/Exchange studies
Objective
In this course, production refers to manufacturing products for the end customer. The course introduces both traditional and modern manufacturing methods and materials related to them. As the material plays an important role in the price formation, manufacturability and usability of the product, you working as an logistics engineer should have a good understanding of the impact of manufacturing methods and materials on costs.
In this course you will learn
- find information on materials and their properties
- know different materials and manufacturing techniques involved to materials
- know different layout types and production strategies
- understand properties of materials and their impact on choices
- apply materials selection and manufacturing technologies
After completing this course, you will have a broad understanding of the terminology of the topics covered in the course. You gain knowledge of the various materials, manufacturing technologies and their potential. You will understand how different materials and manufacturing technologies can be used for real applications. You will have the skills and the ability to search for information about different materials and manufacturing technologies.
Competencies: technological knowledge, engineering practice, communication and team-working.
Learning outcomes:
You will understand the terminology of manufacturing technologies, potential of different materials and their importance. You will manage the key concepts and theories of the topics covered in this course and will be able to apply your prior knowledge to the choice of manufacturing technologies and materials.
Content
The course covers following main themes:
- Lay-out types and production strategies
- Manufacturing technologies (materials, products)
- Different materials – construction and properties
- Material choice and supply chain
- Apply of materials and manufacturing methods
Materials
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Supporting book:
Gupta, H.N. 2009. Manufacturing processes
Teaching methods
Course includes lectures, returnable learning assignments and possible laboratory tasks. Course can also include wider project work made with group of students.
Assignments are done as independent work. The assignments are described in the course workspace. All assignments are either individual assignments or group assignments (described in course workspace) and their due dates will be confirmed as the course progresses.
Employer connections
Seminars, webinars, etc. that take place during the course can be included in the course. This will be discussed in more detail during the course.
Exam schedules
Assessment is based on learning assignments.
The possible date and method of the exam will be announced in the course opening information.
Completion alternatives
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Assessment criteria, satisfactory (1)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Assessment criteria, good (3)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills he or she has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills he or she has learned.
Assessment criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills he or she has learned.
Qualifications
Materials management
Enrollment
01.08.2022 - 25.08.2022
Timing
29.08.2022 - 21.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
School of Technology
Campus
Main Campus
Teaching languages
- English
Seats
0 - 30
Degree programmes
- Bachelor's Degree Programme in Purchasing and Logistics Engineering
Teachers
- Pasi Poutiainen
Teacher in charge
Pasi Poutiainen
Groups
-
TLP22VSBachelor's Degree Programme in Purchasing and Logistics Engineering (AMK) vaihto-opiskelu/Exchange studies
-
TLP21S1Bachelor's Degree Programme in Purchasing and Logistics Engineering
Objective
In this course, production refers to manufacturing products for the end customer. The course introduces both traditional and modern manufacturing methods and materials related to them. As the material plays an important role in the price formation, manufacturability and usability of the product, you working as an logistics engineer should have a good understanding of the impact of manufacturing methods and materials on costs.
In this course you will learn
- find information on materials and their properties
- know different materials and manufacturing techniques involved to materials
- know different layout types and production strategies
- understand properties of materials and their impact on choices
- apply materials selection and manufacturing technologies
After completing this course, you will have a broad understanding of the terminology of the topics covered in the course. You gain knowledge of the various materials, manufacturing technologies and their potential. You will understand how different materials and manufacturing technologies can be used for real applications. You will have the skills and the ability to search for information about different materials and manufacturing technologies.
Competencies: technological knowledge, engineering practice, communication and team-working.
Learning outcomes:
You will understand the terminology of manufacturing technologies, potential of different materials and their importance. You will manage the key concepts and theories of the topics covered in this course and will be able to apply your prior knowledge to the choice of manufacturing technologies and materials.
Content
The course covers following main themes:
- Lay-out types and production strategies
- Manufacturing technologies (materials, products)
- Different materials – construction and properties
- Material choice and supply chain
- Apply of materials and manufacturing methods
Materials
Lecture materials related to the course can be found in the course workspace. Relevant open-source online material can also be used.
Supporting book:
Gupta, H.N. 2009. Manufacturing processes
Teaching methods
Course includes lectures, returnable learning assignments and possible laboratory tasks. Course can also include wider project work made with group of students.
Assignments are done as independent work. The assignments are described in the course workspace. All assignments are either individual assignments or group assignments (described in course workspace) and their due dates will be confirmed as the course progresses.
Employer connections
Seminars, webinars, etc. that take place during the course can be included in the course. This will be discussed in more detail during the course.
Exam schedules
Assessment is based on learning assignments.
The possible date and method of the exam will be announced in the course opening information.
Completion alternatives
The admission procedures are described in the degree rule and the study guide. The teacher of the course will give you more information on possible specific course practices.
Student workload
One credit corresponds to an average of 27 hours of work, which means that the load of five credits is approximately 135 hours. The load is distributed in different ways depending on the course implementation.
Evaluation scale
0-5
Assessment criteria, satisfactory (1)
1: Student has gained knowledge at all the subjects described in the learning outcomes.
2: Student has gained knowledge at all the subjects described in the learning outcomes and is able to can utilize this knowledge.
Assessment criteria, good (3)
3: Student understands all the subjects described in the learning outcomes and is able to apply the skills he or she has learned.
4: Student has attained an excellent level in almost all the subjects described in the learning outcomes and is able to apply the skills he or she has learned.
Assessment criteria, excellent (5)
5: The student has attained an excellent level in all subjects described in the learning outcomes and is able to apply the skills he or she has learned.
Qualifications
Materials management